Improvement in thermal shock resistance of gadolinium zirconate coating by addition of nanostructured yttria partially-stabilized zirconia

Gadolinium zirconate (Gd₂Zr₂O₇, GZ) as one of the promising thermal barrier coating materials for high-temperature application in gas turbine was toughened by nanostructured 3 mol% yttria partially-stabilized zirconia (YSZ) incorporation. The fracture toughness of the composite of 90 mol% GZ-10 mol% YSZ (GZ–YSZ) was increased by about 60% relative to the monolithic GZ. Both the GZ and GZ–YSZ composite coatings were deposited by atmospheric plasma spraying on Ni-base superalloys and then thermal-shock tested under the same conditions. The thermal-shock lifetime of GZ–YSZ composite coating was improved, which is believed to be mainly attributed to the enhancement of fracture toughness by the addition of YSZ. In addition, the failure mechanisms of the thermal-shock tested GZ–YSZ composite coatings were discussed.     

隔热涂料在汽车领域的应用研究

详细分析和研究了隔热涂料在汽车领域(汽车挡风玻璃、塑料及皮革内饰件、激光焊接技术)的应用。     

汽车总装线上远程激光焊接能量评估

通过分析激光源的类型和结构,建立参数数据库,并结合机器人运动的动力学分析,本研究提出了汽车总装线上远程激光焊接(RLW)的能量评估模型。通过对简单焊件进行焊接实验,将传统激光焊接和远程激光焊接进行了对比,结果发现,焊接过程中机器人运动能量逐渐减少,而激光能量逐渐增加。处理时间和激光功率是影响远程焊接能源效率的主要因素。     

碳化钒析出对X80管线钢焊接热影响区韧性的影响

通过Gleeble-3500热模拟机对钒(V)含量分别为0.06%和0.02%的X80管线钢进行了峰值温度为1350℃和750℃的焊接热模拟试验,利用硬度计和光学显微镜(OM)分别分析了焊接热模拟试样硬度和试样中马氏体-奥氏体岛状组织(M-A)的数量、尺寸和形貌。利用透射电镜(TEM)对母材、粗晶区和部分相变区中粒子析出进行了表征。结果表明,与0.02%含V量X80管线钢相比,0.06%含V量的X80管线钢由于V含量较高,在受到多道次焊接热循环影响时,部分相变区有较大量碳化钒(VC)粒子析出,明显阻碍位错运动,使其强度明显提高的同时脆性增大、塑性变形难以进行,导致其焊接热影响区韧性下降。     

施工中电焊机的安全使用简述

从电焊机自身电气特点及建筑工地工作环境入手,探讨电焊机安全技术的实施方法。分析电焊机安全隐患及事故的分类以及电焊机在使用过程中产生危险的原因。介绍电焊机在安装以及作业过程中的安全措施。     

非径向管板焊接接头的超声检测

对AP1000压水堆核电站安全壳贯穿件的非径向管板焊接接头结构特点进行了介绍,并分析其超声检测工艺的重点和难点。通过建立统一的缺陷定位坐标系并结合被检构件的几何特点进行综合分析,推导得出了h值(缺陷回波最高点距套管外壁的距离)的计算方法。为超声检测对这类焊接接头缺陷的准确识别和定位提供了行之有效的方法,为解决这类焊接接头的超声检测技术受限区提供了行之有效的措施。     

Corrosion resistance and electrical conductivity of plasma nitrided titanium

The continuous and dense Ti–N compound layers with a thickness ranging from 0.7 to 2.1 μm were formed on the titanium by plasma nitriding at 700 °C for different times with hollow cathode discharge assistance. Scanning electron microscope (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) were used to characterize the nitrided layer. XRD and XPS results showed that the compound layer was mainly composed of Ti₂N phase. The corrosion current density of 4 h nitrided titanium was 0.016 μA/cm² (cathode) and 0.03 μA/cm² (anode), respectively. The electrical conductivity of samples was evaluated by means of the interfacial contact resistance (ICR). The value of 4 h nitrided titanium was 4.94 mΩ-cm² which was much lower than that of original titanium 26.25 mΩ-cm² under applied force of 150 Ncm^?2 after corrosion test. The results showed that the electrical conductivity and corrosion resistance of the titanium bipolar plates (BPs) were apparently improved with the formation of Ti₂N compound layer.     

基于响应曲面法的涡轮增压器废气阀门激光焊接工艺优化研究

激光焊接技术凭借其高效、高精度的特点已广泛应用在汽车制造产业,在涡轮增压器的生产中,激光焊接也逐步被应用于实现废气阀门与阀杆的连接。虽然当前对于激光焊接的工艺研究很多,但对工艺参数的优化也一直缺少一个科学有效的方法。本文以熔接深度、熔接宽度和内部缺陷作为响应变量,选取焊接功率、焊接速度作为因子,运用响应曲面法(RSM)设计实验方案,通过对响应结果进行分析,研究焊接参数对焊接质量的影响,拟合能够预测最优参数的数学模型,最终将获得的最优参数运用到生产中进行验证。     

Impact of gas formation on the transfer of Ti and O from TiO2-bearing basic-fluoride fluxes to submerged arc welded metals: A thermodynamic approach

Gas-slag-metal equilibrium calculations are performed to investigate the transfer of Ti and O to submerged arc welded metals with increasing TiO₂ addition in basic-fluoride fluxes. The results indicate that activities of TiO₂ and Ti₂O₃ considering slag-metal reactions alone do not account for Ti transfer behaviors since TiF₃ gas tends to form and reduce Ti-oxide activities. Thermodynamic simulation indicates that consideration of gases is essential to improve the prediction accuracy of Ti and O concentrations.